| Qalabka | Bronze iyo birta aan lahayn |
|---|
Hydraulics & Mashiinada sagxada
Nidaamyada Birigga Marine Winch
Dib u eeg tixraacyada qalabka bireega winch iyo sifooyinka firfircoonida.
Nambarada taxanaha ah waxay u baahan yihiin aqoonsiga gacanta. U dir lambarka taxanaha iyo sawirka magaca kooxdayada; Kani maaha baadhitaan-lambar-lambar online ah.
Noocyada
3 ka mid ah 3 noocLiistada rog · Hoos ka dooro calaamad
Tixraacyada calaamaduhu waxay la xidhiidhaan qaybtan alaabta, lama xaqiijin heshiisyada saadka. Helitaanka iyo waafaqsanaanta waxay u baahan yihiin xaqiijin U dir qalabka saxda ah, moodeelka iyo faahfaahinta qaybta foomka weydiinta.
Qaababka
| Summada | Qaabka / Tixraaca | Qalabka | Ficil |
|---|---|---|---|
| Kobelt | Nidaamyada Birigga Marine Winch | ||
| DELLNER BUBENZER | Taxane | Biriga-matoorka-winch-ka | |
| Svendborg Brakes | Taxane | biriiga badbaadada haydarooliga-sii daynta badda |
Xogta Farsamada
Tixraaca alaabta Xogta tixraaca ee qaybta alaabtan. Xaqiiji qaabka saxda ah, qaabeynta iyo helitaanka marka aad codsaneyso.
Kobelt
5026-SH
Nidaamyada Birigga Marine Winch| Summada | Kobelt |
|---|---|
| Taxane | 5026 |
| Qaabka | 5026-SH |
| Nooca qalabka | Nidaamyada Birigga Marine Winch |
| Ficil bireega | Guga ayaa la dabaqay/hydraulically la sii daayay |
| Qalabka | Bronze iyo birta aan lahayn |
| Balaadhka saxanka / dusha xoqidda | 102 × 178 mm |
| Dhexroor disc | 762-1,549 mm |
| Doorka | Dhigashada ama biriiga degdega ah |
| Codsiyada | Badda/ Saliidda & Gaaska / Warshada Korontada/ Warshada Kiimikada/ Dayactirka Warshadaha |
Waafaqsanaanta cabbirka saxanku ma qeexayo wareegga ugu dambeeya ee haynta; cabbirka biriiga iyo cadaadiska sii deynta ayaa u baahan xulashada faahfaahsan.
Habaynta & Isku-habaynta
| Qalabka / alaabta | Nidaamyada Birigga Marine Winch |
|---|---|
| Codsiyada | Badda/ Saliidda & Gaaska / Warshada Korontada/ Warshada Kiimikada/ Dayactirka Warshadaha |
| Saldhig u dhigma | Qaabka, lambarka taxanaha iyo sawirka rakibaadda |
Qaybaha Spare
Halbeegga 5026-SH caliper, ma aha darbiga-dhinaca SHW. Ku habboon qaabeynta rakiban, lambarka taxanaha qalabka iyo sawirka asalka ah ka hor intaadan dalban.Bixi qaabka qalabka, sawir magaceed ama lambarka qayb ee jira. Waxaan kaa caawin doonaa aqoonsiga qaybaha loo baahan yahay.
| Qayb | Qaybta No. | Weydiin |
|---|---|---|
| Shirka kabaha safanHeerka 5/8-inch K5 dahaarka. Codsiyada kale ee isku dhaca waxay u baahan yihiin kabo ka duwan. | P/N: 5026-LS | |
| Dhaqdhaqaaqa Haydarooliga-sii dayntaHeerka -SH, 820 psi sii deynta; ma -SH75/-SH80/-SH100. | P/N: 6232-H115 | |
| Xirmada shaabadda actuatorLoogu talagalay rakibay 6232-H115 actuator. | P/N: 6232-HD-RK | |
| block pivot center | P/N: 5026-0013 | |
| Bar-xidhka pivot-ka dibadda | P/N: 5026-0014 | |
| Caliper pivot pin | P/N: 5026-0028 | |
| Kabaha meelaynta biinanka | P/N: 5026-0027 | |
| Isku xirka dheellitirka pivot-end | P/N: 5025-0011 | |
| Isku xirka pivot pin | P/N: 5024-0026 | |
| Isku xirka dheellitirka fargeeto-dhamaadka | P/N: 5026-0012 | |
| Beddelka dahaarka isku dhacaHeerka K5, 5/8-inch; xaqiiji qeexida khilaafka. | P/N: 5026-0007-K |