| Materials | Bronze and stainless steel |
|---|
Hydraulics & Deck Machinery
Marine Winch Brake Systems
Review winch brake equipment references and actuation characteristics.
Serial numbers require manual identification. Send the serial number and a nameplate photo to our team; this is not an online serial-number lookup.
Brands
3 of 3 brandsScroll the list · Select a brand below
Brand references relate to this product category, not confirmed supply agreements. Availability and compatibility require confirmation. Send the exact equipment, model and part details through the enquiry form.
Models
| Brand | Model / Reference | Equipment | Action |
|---|---|---|---|
| Kobelt | Marine Winch Brake Systems | ||
| DELLNER BUBENZER | Series | Marine winch-motor brake | |
| Svendborg Brakes | Series | Marine hydraulic-release safety brake |
Technical Data
Product references Reference data for this product category. Confirm the exact model, configuration and availability when enquiring.
Kobelt
5026-SH
Marine Winch Brake Systems| Brand | Kobelt |
|---|---|
| Series | 5026 |
| Model | 5026-SH |
| Equipment type | Marine Winch Brake Systems |
| Brake action | Spring applied / hydraulically released |
| Materials | Bronze and stainless steel |
| Disc width / rubbing surface | 102 × 178 mm |
| Disc diameter range | 762–1,549 mm |
| Role | Parking or emergency braking |
| Applications | Marine/Oil & Gas /Power Plant/Chemical Plant/Industrial Maintenance |
Disc size compatibility does not specify the final holding torque; brake sizing and release pressure require the detailed selection.
Configuration & Matching
| Equipment / product | Marine Winch Brake Systems |
|---|---|
| Applications | Marine/Oil & Gas /Power Plant/Chemical Plant/Industrial Maintenance |
| Matching basis | Model, serial number and installation drawing |
Spare Parts
Standard 5026-SH caliper, not sidewall-mount SHW. Match the installed configuration, equipment serial number and original drawing before ordering.Provide the equipment model, a nameplate photo or an existing part number. We will help identify the required parts.
| Component | Part No. | Enquiry |
|---|---|---|
| Lined shoe assemblyStandard 5/8-inch K5 lining. Other friction codes require a different shoe. | P/N: 5026-LS | |
| Hydraulic-release actuatorStandard -SH, 820 psi release; not -SH75/-SH80/-SH100. | P/N: 6232-H115 | |
| Actuator seal kitFor installed 6232-H115 actuator. | P/N: 6232-HD-RK | |
| Centre pivot block | P/N: 5026-0013 | |
| Outer pivot block | P/N: 5026-0014 | |
| Caliper pivot pin | P/N: 5026-0028 | |
| Shoe locating pin | P/N: 5026-0027 | |
| Pivot-end balancing link | P/N: 5025-0011 | |
| Link pivot pin | P/N: 5024-0026 | |
| Fork-end balancing link | P/N: 5026-0012 | |
| Replacement friction liningStandard K5, 5/8-inch; verify friction specification. | P/N: 5026-0007-K |