| Nominal connection | DN60 |
|---|
Auxiliary & Engine-Room Equipment
Marine Plate Heat Exchangers
Compare plate heat-exchanger models and their published design limits.
Serial numbers require manual identification. Send the serial number and a nameplate photo to our team; this is not an online serial-number lookup.
Brands
5 of 5 brandsScroll the list · Select a brand below
Brand references relate to this product category, not confirmed supply agreements. Availability and compatibility require confirmation. Send the exact equipment, model and part details through the enquiry form.
Models
| Brand | Model / Reference | Equipment | Action |
|---|---|---|---|
| Alfa Laval | Marine Plate Heat Exchangers | ||
| Alfa Laval | Marine Plate Heat Exchangers | ||
| Alfa Laval | Marine Plate Heat Exchangers | ||
| APV | Series | Gasketed plate heat exchanger | |
| Kelvion | Series | Gasketed plate heat exchanger | |
| Tranter | Series | Gasketed plate-and-frame heat exchanger | |
| SONDEX | Series | Gasketed plate heat exchanger |
Technical Data
Product references Reference data for this product category. Confirm the exact model, configuration and availability when enquiring.
Alfa Laval
T6
Marine Plate Heat Exchangers| Brand | Alfa Laval |
|---|---|
| Series | Marine GPHE |
| Model | T6 |
| Equipment type | Marine Plate Heat Exchangers |
| Nominal connection | DN60 |
| Reference height / width | 890 / 320 mm |
| Temperature range | 0–150 °C |
| Pressure | 16 bar |
| Maximum flow | 60 m³/h |
| Reference water duty at LMTD 6 | 800 kW |
| Applications | Marine/Oil & Gas /Power Plant/Chemical Plant/Industrial Maintenance |
Water-duty capacity follows the manufacturer’s stated LMTD 6 condition; a configured plate count and flow arrangement are still required.
Configuration & Matching
| Equipment / product | Marine Plate Heat Exchangers |
|---|---|
| Applications | Marine/Oil & Gas /Power Plant/Chemical Plant/Industrial Maintenance |
| Matching basis | Model, serial number and installation drawing |
Spare Parts
T6 gasketed Industrial line, only for the delivered plate arrangement and frame configuration. Plate pattern, material, thickness, gasket compound/profile and fastening hardware must match the unit serial-number-specific bill of materials. Not universal interchangeability across T6 variants or marine installations.Provide the equipment model, a nameplate photo or an existing part number. We will help identify the required parts.
| Component | Enquiry |
|---|---|
| Heat-transfer platesChannel/end role, hole pattern, material, thickness and hanging order from delivered plate list. | |
| Field gasketsProfile, attachment method and elastomer matched to delivered plate and operating medium. | |
| Ring gasketsUse only where included in the unit's supplied gasket arrangement; no generic kit inferred. | |
| End gasketsEnd-plate position and profile from delivered plate list. | |
| Tightening-bolt nutsFrame-specific thread and tightening-bolt configuration; no size inferred from generic torque tables. | |
| Bearing boxesOnly for equipped frame variants; check unit drawing and bill of materials. |