| wadata | 376-424 V / 3 lokaci / 50 Hz |
|---|---|
| Yawo | 500-1,000 l/h |
| Matsin aiki | 80-250 bar |
Kayan Agaji & Injin-Dakin
Injin Tsabtace Matsala
Nemo injin tsabtace matsi mai ƙarfi ta cikakken tsari da lambar tsari.
Serial lambobi suna buƙatar ganewa da hannu. Aika lambar serial da hoton farantin suna ga ƙungiyarmu; wannan ba binciken lamba ba ne akan layi.
Alamomi
4 cikin 4 brandsGungura lissafin · Zaɓi alama a ƙasa
Nassoshi iri suna da alaƙa da wannan nau'in samfurin, ba a tabbatar da yarjejeniyar wadata ba. Kasancewa da dacewa suna buƙatar tabbaci. Aika ainihin kayan aiki, samfuri da cikakkun bayanai na ɓangaren ta hanyar binciken.
Samfura
| Alamar | Model / Magana | Kayan aiki | Aiki |
|---|---|---|---|
| Kärcher | Kanfigareshan | Injin Tsabtace Matsala | |
| Kärcher | Kanfigareshan | Injin Tsabtace Matsala | |
| Nilfisk | Na'urar tsaftacewa mai ƙarfi | ||
| Kränzle | Na'urar tsaftacewa mai ƙarfi | ||
| IPC | Jerin | Na'urar tsaftacewa mai ƙarfi |
Bayanan Fasaha
Bayanan samfur Bayanan bayani na wannan nau'in samfurin. Tabbatar da ainihin samfurin, daidaitawa da samuwa lokacin nema.
Kärcher
HD 10/25-4 S - 1.286-954.0
Injin Tsabtace Matsala| Alamar | Kärcher |
|---|---|
| Jerin | HD super class |
| Part / Order No. | HD 10/25-4 S - 1.286-954.0 |
| Nau'in kayan aiki | Injin Tsabtace Matsala |
| Part / Order No. | 1.286-954.0 |
| wadata | 376-424 V / 3 lokaci / 50 Hz |
| Yawo | 500-1,000 l/h |
| Matsin aiki | 80-250 bar |
| Matsakaicin matsa lamba | 280 bar |
| Load da aka haɗa | 8,8 kW |
| Matsakaicin zafin shiga | 60 °C |
| Nauyi tare da kayan haɗi | 69.8 kg |
| Girma | 607 × 518 × 1,063 mm |
| Aikace-aikace | Ruwa/Mai & Gas/Tsarin Wutar Wuta/Tsarin Kemikal/Masu Kula da Masana'antu |
50 Hz da aka saita abu; Ba za a iya musanya tare da sigar 60 Hz ba.
Kanfigareshan & Daidaitawa
| Kayan aiki / samfur | Injin Tsabtace Matsala |
|---|---|
| Aikace-aikace | Ruwa/Mai & Gas/Tsarin Wutar Wuta/Tsarin Kemikal/Masu Kula da Masana'antu |
| Tushen daidaitawa | Model, serial number da shigarwa zane |
Kayan gyara
HD 10/25-4 S — 1.286-954.0 - Daidaitaccen daidaitawar 1.286-954.0 / 50 Hz. Na'ura mai dacewa, ginin lantarki da gyaran famfo dole ne a daidaita su; Ba a kula da lambobin labarin biyu a matsayin iri ɗaya ba.Samar da samfurin kayan aiki, hoton farantin suna ko lambar ɓangaren da ke akwai. Za mu taimaka gano sassan da ake buƙata.
| Bangaren | Tambaya |
|---|---|
| SAUKI! Ƙarfin Ƙarfin Ƙarfi (na'ura) | |
| Babban tiyo mai ƙarfi (na'ura) | |
| Lance 1050 mm (na'ura) | |
| Bututun wuta (na'urorin haɗi) | |
| Sarrafa Servo (kayan haɗi) | |
| Motoci | |
| Axial famfo | |
| Bakin karfe pistons | |
| Brass Silinda kai | |
| Shigar ruwa tace | |
| Gilashin gani na matakin mai |